Truck Trailer BodyFRP Vans
Fibreglass Reinforced Panel (FRP) Vans provide an enclosed structure where freight can be stored. The body is constructed from a composite of fibreglass and plywood that are bonded together under intense pressure. The enclosed body is particularly useful for transporting items that must be protected from external conditions.
NOSECONE
NOSECONE
LOAD LOC TRACK
LOAD LOC TRACK
SIDE DOOR ACCESS
SIDE DOOR ACCESS
DOUBLE REAR FRP DOORS
DOUBLE REAR FRP DOORS
Alltruck Bodies
Description
• 20mm white FRP front and side wall panels
• 200mm high aluminium kick panels around walls
• LED work light fitted in front or rear corner
• One-piece aluminium roof sheet over aluminium roof bows spaced 600mm apart
• Heavy-duty external top, bottom, and front corner polished aluminium extrusions fastened to FRP panels with Camtainers® and Maxlocks®
• Heavy-duty cast aluminium front corner caps
• 3mm steel chequer plate or hyper grip timber panel floor fitted over high tensile 75 x 50 steel RHS subframe – cross bearers maximum 450mm apart
• Double rear FRP doors with three hinges, seals, and one camlock per door
• Fixed safety grab handles on rear pillars
• Rear steel RHS under-run bar with rubber dock buffers
• LED lights for all statutory side, front, rear outline marker lights, and licence plate lights
• All compulsory mudguards, mudflaps, reflectors, and marker plates to suit registration requirements in State of intended operation
• 200mm high aluminium kick panels around walls
• LED work light fitted in front or rear corner
• One-piece aluminium roof sheet over aluminium roof bows spaced 600mm apart
• Heavy-duty external top, bottom, and front corner polished aluminium extrusions fastened to FRP panels with Camtainers® and Maxlocks®
• Heavy-duty cast aluminium front corner caps
• 3mm steel chequer plate or hyper grip timber panel floor fitted over high tensile 75 x 50 steel RHS subframe – cross bearers maximum 450mm apart
• Double rear FRP doors with three hinges, seals, and one camlock per door
• Fixed safety grab handles on rear pillars
• Rear steel RHS under-run bar with rubber dock buffers
• LED lights for all statutory side, front, rear outline marker lights, and licence plate lights
• All compulsory mudguards, mudflaps, reflectors, and marker plates to suit registration requirements in State of intended operation
Alltruck Bodies
Options
• Corporate signage on separate quote if required – please contact us
• Rear-vision camera system with safety audio system
• Side under-run protection system
• Fibreglass NoseCone® or Sideburns® to suit
• Side door with camlock or flush lock, non-slip step, and pivoting safety handle
• 19mm tongue & groove hardwood flooring
• 28mm Container wood flooring
• 5mm steel chequer plate floor to suit pallet jacks
• Toddco® or Whiting panel type rear door
• Twin camlocks on each rear door
• Full width furniture tailboard with spring and HD chains, and mating plate
• Full width 150mm deep chequer plate rear step
• Pull-out walk-up board, stored under floor
• Flat rectangular steel tube tie rails on each wall
• Load-loc track on each side wall, and spring loaded shoring bars
• Dressed timber or carpet covered battens all around
• Extra LED side marker lights, or LED mid-body indicator lights
• High mount LED repeater stop/tail/indicator lights at rear
• Aluminium chequer plate mudguards, or polished stainless steel flat style mudguards
• Steel toolbox 900 x 450 x 450mm with inset lock
• Toolbox with aluminium chequer plate lid, or with polished stainless steel lid
• Range of tilting, retractable, and Tuckaway tailgates
• Appropriate certification for all State registration requirements
• Rear-vision camera system with safety audio system
• Side under-run protection system
• Fibreglass NoseCone® or Sideburns® to suit
• Side door with camlock or flush lock, non-slip step, and pivoting safety handle
• 19mm tongue & groove hardwood flooring
• 28mm Container wood flooring
• 5mm steel chequer plate floor to suit pallet jacks
• Toddco® or Whiting panel type rear door
• Twin camlocks on each rear door
• Full width furniture tailboard with spring and HD chains, and mating plate
• Full width 150mm deep chequer plate rear step
• Pull-out walk-up board, stored under floor
• Flat rectangular steel tube tie rails on each wall
• Load-loc track on each side wall, and spring loaded shoring bars
• Dressed timber or carpet covered battens all around
• Extra LED side marker lights, or LED mid-body indicator lights
• High mount LED repeater stop/tail/indicator lights at rear
• Aluminium chequer plate mudguards, or polished stainless steel flat style mudguards
• Steel toolbox 900 x 450 x 450mm with inset lock
• Toolbox with aluminium chequer plate lid, or with polished stainless steel lid
• Range of tilting, retractable, and Tuckaway tailgates
• Appropriate certification for all State registration requirements
Let's connect
Contact Alltruck Bodies
