Truck Trailer BodyColorbond Vans
Colorbond Vans provide an enclosed structure where freight can be stored and transported. The bodies are constructed using colorbond walls and an aluminium roof sheet. The enclosed body is particularly useful for transporting items that must be protected by external conditions.
NOSECONE
NOSECONE
SIDE DOOR
SIDE DOOR
TAILGATE
TAILGATE
INTERNAL STEEL FRAMING
INTERNAL STEEL FRAMING
Alltruck Bodies
Description
• Steel framed van body with RHS framed front wall which meets Load Restraint Guide requirements and 3mm ply lining between frame and flat white Colorbond® exterior
• External aluminium top and bottom rub rails
• Steel roof frame, with 3mm ply lining and one-piece aluminium roof sheet
• 3mm steel chequer plate OR 17mm Hypergrip timber panel flooring
• 150mm high steel kick panels around bottom of walls
• Three (3) rectangular steel tube tie rails on each wall and two (2) in roof
• LED work light fitted in rear corner
• Double rear FRP doors with three hinges, seals and one camlock per door
• Fixed safety grab handles on rear pillars
• Flush rear under-run bar with dock rubbers
• LED lights for all statutory side, front, rear outline marker light and licence plate lights
• All compulsory mudguards, mudflaps, reflectors, and marker plates to suit registration requirements in State of intended operation
• External aluminium top and bottom rub rails
• Steel roof frame, with 3mm ply lining and one-piece aluminium roof sheet
• 3mm steel chequer plate OR 17mm Hypergrip timber panel flooring
• 150mm high steel kick panels around bottom of walls
• Three (3) rectangular steel tube tie rails on each wall and two (2) in roof
• LED work light fitted in rear corner
• Double rear FRP doors with three hinges, seals and one camlock per door
• Fixed safety grab handles on rear pillars
• Flush rear under-run bar with dock rubbers
• LED lights for all statutory side, front, rear outline marker light and licence plate lights
• All compulsory mudguards, mudflaps, reflectors, and marker plates to suit registration requirements in State of intended operation
Alltruck Bodies
Options
• Corporate signage on separate quote – please contact us
• Rear-vision camera system with safety audio system
• Side under-run protection system
• Sloping front with aluminium chequer plate cover panel
• 100mm x 100mm aluminium angle on top sides & front corners, plus polished bottom rail extrusions
• Fibreglass NoseCone® or Sideburns® to suit
• Side door with camlock or flush lock, non-slip step and pivoting safety handle
• Twin camlocks on each rear door
• Aluminium side or rear roller door
• 19mm tongue & groove hardwood flooring
• 5mm steel chequer plate floor to suit pallet jacks
• Toddco® or Whiting panel type rear door
• Full width furniture tailboard with spring and HD chains and mating plate
• Full width 150mm deep chequer plate rear step
• Pull-out walk-up board, stored under floor
• Load-loc track on each side wall, and spring loaded shoring bars
• Dressed timber or carpet covered battens all around
• Extra LED side marker lights, or LED mid-body indicator lights
• High mount LED repeater stop/tail/indicator lights at rear
• Aluminium chequer plate mudguards, or polished stainless steel flat style mudguards
• Steel toolbox 900 x 450 x 450mm with inset lock
• Toolbox with aluminium chequer plate lid, or with polished stainless steel lid
• Range of tilting, retractable or Tuckaway tailgates
• Appropriate certification for all state registration requirements
• Rear-vision camera system with safety audio system
• Side under-run protection system
• Sloping front with aluminium chequer plate cover panel
• 100mm x 100mm aluminium angle on top sides & front corners, plus polished bottom rail extrusions
• Fibreglass NoseCone® or Sideburns® to suit
• Side door with camlock or flush lock, non-slip step and pivoting safety handle
• Twin camlocks on each rear door
• Aluminium side or rear roller door
• 19mm tongue & groove hardwood flooring
• 5mm steel chequer plate floor to suit pallet jacks
• Toddco® or Whiting panel type rear door
• Full width furniture tailboard with spring and HD chains and mating plate
• Full width 150mm deep chequer plate rear step
• Pull-out walk-up board, stored under floor
• Load-loc track on each side wall, and spring loaded shoring bars
• Dressed timber or carpet covered battens all around
• Extra LED side marker lights, or LED mid-body indicator lights
• High mount LED repeater stop/tail/indicator lights at rear
• Aluminium chequer plate mudguards, or polished stainless steel flat style mudguards
• Steel toolbox 900 x 450 x 450mm with inset lock
• Toolbox with aluminium chequer plate lid, or with polished stainless steel lid
• Range of tilting, retractable or Tuckaway tailgates
• Appropriate certification for all state registration requirements
Let's connect
Contact Alltruck Bodies
